Anatomy Products

Feature
1.All stainless steel 304 construction. It is half-closed structure.
2.Heliarc-welded seams and joints, ground and polishes to match adjoining surfaces.
3.It with the adjustable square base. The table height is adjustable from 720to 920mm
4.Table can rotate 30 degree
5.Operating tray removable(3pcs) and detachable operating tray.
6.Plumbing and electrical lines factory installed and require only single point connection at the project location.
7.There is the power of the socket on the side of table. It is waterproof and can be used for other instrument connections.
Crushing and sewage system
1.Large single compartment sink basin.
2.With the pulverizer, It can crush dirt and little bone instantly.
3.Two taps. Sensor faucet with cold water and manual faucet with hot or cold water.
4.With the removable spray tap, the water pressure can be adjusted. It can wash and clean each corner of table dirt.
Drained system
1.Rapid and positive drainage
2.With drained pipeline, the treated liquid drained along the drained system
3.Exhaust system function. Air outlet is at the inside of the table. The exhaust way is down. It needs to connect with the exhaust blower outside.
4.OEM and customer special request is accepted

Application
Medicolegal expertizing instrument, surgical instrument. The autopsy saw can be worked with both AC and DC power. No damage to cartilage tissue, no splashing during cutting, and it has very strong cutting force on hard substance with plasticity, it cuts very fast. The saw blades are made of high quality stainless steel, very endurable. Simple and convenient in operation, safe and lightweight. Motor with low temperature, and it doesn’t burns.
Host parameters
Nominal voltage: DC 12V
Unload current: ≥4.5A
Input power: ≥120W
Axis swing times: 16000/min
Main unit weight: 1.1Kg
Swing angle: 4°
Control box parameters
Input voltage: 100V-240V
Output voltage: 10V-12V
Battery: 86.4Wh
Charging time: 4 hours

Mortuary Transfer Cart:

Stainless steel dissecting table autopsy table

Model Number: RD-1552


The corpses Transfer Cart is a series of product for hospital, funeral parlor, and postmortem examination department.

Features:

01: Material is Stainless Steel 304.

02: With a weep hole on the table.

03: It packed with 4 pcs strong quality universal wheel to be sure the unit is easy to move.

04: The size can be made according the users special request.

Application
Human and animal autopsy and temporary storage.
Feature
1.All stainless steel 304 construction. It is half-closed structure.
2.Heliarc-welded seams and joints, ground and polishes to match adjoining surfaces.
3.It with the adjustable square base. The table height is adjustable from 720to 920mm(optional)
4.Operating tray removable(3pcs) and detachable operating tray.
5.Plumbing and electrical lines factory installed and require only single point connection at the project location.
6.There is the power of the socket on the side of table. It is waterproof and can be used for other instrument connections.

Full stainless steel 304 material.
- There are built-in lighting on the operation desk.
- Pedal to control cold and hot water.
- The Sewer line and the water bath, to facilitate work and clean up equipment.
- Cold and hot water telescopic tap.
- There are sockets on the equipment to facilitate the use of other equipment.

RD-1009 Dissecting table specifications: L1 500mm*W 600mm*H 850mm, the overall use of high-quality 304 stainless steel welding, all exposed welds have been seamlessly polished, the anatomical table is concave 1cm, to prevent
liquid from flowing out of the table, the table is designed to move, you can Free to move and other equipment supporting use.

Sewage design: The lower end of the entire table top is inclined, connected
to the sink drained to the sewer

Cleaning design: High-pressure water gun cleaning, with 2 m anti-riot water pipe.

Mortuary Dissecting Cart :
Mortuary stainless steel table:
With the model number: RD-332S

The corpses Transfer Cart is a series of product for hospital, funeral parlor, and postmortem examination department.

Features:

01: Material is Stainless Steel 304.

02: With a weep hole.

03: It packed with 4 pcs strong quality universal wheel to be sure the unit is easy to move.

04: The size can be made according the users special request.

Mortuary Dissecting Cart :
Mortuary autopsy stainless steel table:

Model Number: RD-1551


The corpses Transfer Cart is a series of product for hospital, funeral parlor, and postmortem examination department.

Features:

01: Material is Stainless Steel 304.
02: With a weep hole.
03: The size can be made according the users special request.
OUR STORE：https://syroundfin.en.alibaba.com

Mortuary Transfer Cart:
With the model: RD-332S
The corpses Transfer Cart is a series of product for hospital, funeral parlor, and postmortem examination department.

Features:

01: Material is Stainless Steel 304.

02: With a weep hole on the table.

03: It packed with 4 pcs strong quality universal wheel to be sure the unit is easy to move.

04: The size can be made according the users special request.
OUR STORE：https://syroundfin.en.alibaba.com